How do you activate Lutron shades?

Grasp the headrail with both hands and tilt it back into the brackets, pressing gently until you hear a click. Hold “Close” button for about 5 seconds, until the shade button blinks and turns off. You have assigned the control to the shade. Note: Repeat to assign more controls.

How do I default a Lutron shade?

Step 1: Use the control’s Raise and Lower buttons to adjust the shade to desired level. Step 2: Hold the Favorite button on the Pico® for about 10 seconds until the shade button blinks. Restoring Shades to Factory Default Note: This step will remove any controls assigned to the shade.

How do you set limits on Lutron blinds?

Lower Limit: Step 1: Tap the shade button on the shade you want to adjust. The shade button illuminates green. Step 2: Hold the Open and Raise buttons simultaneously on the Pico for about 10 seconds, until the shade button blinks and remains lit.

What are the dimensions of Lutron contract roller motorized shades?

8 in (127 mm x 130 mm) pocket (single-mount) • 7 in x 11 in (178 mm x 279 mm) pocket (dual-mount) IMPORTANT: Lutron Contract Roller motorized shades must be mounted to blocking or other suitable structural material. It is the responsibility of the installer to choose and install fasteners that are appropriate for the mounting

How do I control my Lutron shades?

You can now control Lutron shades using normal voice commands such as “Hey Google, open my living room shades.” Experience luxury at an affordable price with Serena shades by Lutron. These ultra-quiet battery-powered shades install wirelessly, and can be operated from anywhere in the room using a remote control.

What cables do I need to install a roller shade?

Lutron makes 3 products that you can use. QS Wired is available in all form factors (roller shades, roman shades, drapery track, etc.). You will need a power supply and a 4-conductor cable for each shade. 2 conductors for power and 2 for data.

What do I need to install QS wired shades?

QS Wired is available in all form factors (roller shades, roman shades, drapery track, etc.). You will need a power supply and a 4-conductor cable for each shade. 2 conductors for power and 2 for data. They wire directly to the QS bus on your HomeWorks processor. Power panels are available for larger quantities.